Road Gully lifter Large lifting hook
£157.50 + VATEAN: 8718026806644
SKU: GL-1021-000
Shop
Showing 97–144 of 1507 resultsSorted by popularity
-
-
Board Transporter “Rock & Roll” Sheet material transport trolly
£240.83 + VATEAN: 8718026806002
SKU: DT-1021-000
https://youtu.be/OkNBFpWmcNY
-
Table for Bricklayer Cutter “Quattro – Quattro” Table only!
£129.00 + VATEAN: 8718026802608
SKU: BLC-W-A-T-1021-000
https://youtu.be/f24yeb93f9w
-
Brick Cutter 120 – 35/70mm “Quattro – Quattro”
£282.50 + VATEAN: 8718026802257 SKU: BLC-W-A-1021-000
https://youtu.be/f24yeb93f9w
-
Brick Cutter Mini Cutter “Tom Thumb”
£32.50 + VATEAN: 8718026806125
SKU: MC-1021-000
https://youtu.be/3XYF-NDe9YE
-
Block Cutter Paving block / Stone splitter 430- 120 mm ORIT “Slab-Master-43”
£390.83 + VAThttps://youtu.be/ZIC03aRdJE8
-
IG4000 4KW Petrol Inverter Generator 230v & 12v USB Quiet running
£999.00 + VATThe Lumag Inverter Generator IG-4000 was designed in Germany and is the perfect companion for permanent use thanks to its 100% copper winding and durable control. By connecting two generators in parallel, a power of up to 8kW can be achieved. The clean 50Hz sine wave ensures that even sensitive devices such as laptops or televisions can be operated without any problems. A reliable partner for use on the road or on construction sites.
Did you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
-
Garden Chipper GAMUL HC100 50mm Capacity 212cc engine
£499.17 + VATDid you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
-
Mini Digger 600KG Petrol Engine Lumag MB-600 includes Accessories
£4,999.17 + VATPARTICULARITIES
It also has an LED spotlight, two mirrors, an operating hours counter and a horn.
The scope of delivery includes the following attachments: pallet forks, harvester rake attachment, “shovel thumb” and gripper.Did you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
EAN: 4047424008300
SKU: MB600
-
Mini Dumper Lumag MD500EProH 500kg Electric Power Barrow with Hydraulic Tip
£2,329.17 + VATIntroducing the Lumag MD500Epro Power Barrow, the environmentally friendly and powerful electric dumper designed to assist you with all your transport needs. Whether you’re working in construction, landscaping, or any other industry, the MD500Epro is the perfect companion for a wide variety of activities.
Did you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
video shows the NON Hydraulic tipping version
-
Lumag PTO RAMBO HC20HZ Chipper – 200mm Capacity
£3,332.50 + VATThe Lumag PTO RAMBO HC20HZ Chipper is a professional chipper that effortlessly chips branches up to a diameter of 200 mm and can be used flexibly anywhere by means of tractor and PTO. The hydraulic feed roller and the individually adjustable feed speed make work easier. The chipper also processes unruly material thanks to the four blades and one counter-blade The chipped material is ejected via the 360° rotating and 75 cm high ejection chute. The chipper has a hinged disc wheel housing and a hinged feed hopper for easier transport and storage. The hydraulic oil tank with a capacity of 26.5 liters and temperature indicator has been placed under the unit to save space.
Did you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
-
Petrol Firewood Automatic Firewood processor Lumag SSA500GHPRO
£8,582.50 + VATFirewood processors are now built to order in Germany and will take a minimum of 3 weeks for delivery, but will often take longer depending on stock levels and work load. Delivery will be directly to the end user and will need a forklift to unload. Please contact us for an accurate delivery time prior to ordering. This is a special order item and will be subject to a 30% sur charge if the order is cancelled prior to delivery.
-
-
Lumag PTO RAMBO-HC15HZ chipper
£2,499.17 + VATThe Lumag PTO RAMBO-HC15HZ chipper is a powerful and efficient wood chipping solution designed for tractors with a PTO connection. With its heavy-duty construction and high-capacity engine, this chipper effortlessly converts branches, brush, and other wood debris into valuable wood chips. Equipped with adjustable intake chute and safety features, it ensures smooth operation and operator protection. Ideal for forestry, landscaping, and agricultural applications, the Lumag PTO RAMBO-HC15HZ chipper is the perfect addition to your tractor-powered equipment lineup, delivering reliability and performance when you need it most.
Did you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
EAN: 4047424009437
SKU: HC15HZ
-
Lumag MD500EK 500kg Electric Power Barrow with Electric Tip
£1,665.83 + VATLumag MD500EK 500kg Electric Power Barrow with Electric Tip
Did you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
-
-
-
MD800HPRO petrol track dumper with Free Skip Bucket worth £599
£3,582.50 + VATDid you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
-
-
-
-
-
-
-
Air Filter Insert for Loncin GF270F Engine
£10.82 + VATBIN LOC: 050209
Air Filter Insert for Loncin GF270F Engine
-
MD300 500 500H Clutch Cable 120cm
£33.29 + VATBIN LOC: 040210
Clutch Cable for pre 2016 MD300 and MD500
Outer cable 980mm
Inner cable 1210mm
A lead barrel on one end and spring on the other end
-
Drive Belt for RP160 HPC Wacker Plate (914)
£28.09 + VATBIN LOC: 060111
Drive Belt for Lumag RP160-HPC
-
Petrol Wacker Plate Throttle Cable
£27.71 + VATBIN LOC: 130303
Throttle cable to fit
VP60, RP700Pro, RP1100Pro, RPi11, RPi12N, RPi13N RP1400Pr
-
-
Lumag G3E 3 kw Petrol Generator
£349.17 + VATThe Lumag G3E Petrol Generator features a fully copper wound starter and remote control electric start. Built in a sturdy wheeled steel frame with a powerful 3 kw output. This generator has 230v outputs.
Did you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
SKU: G3E
EAN: 4047424006542
-
Lumag 5EB300 300mm Post Hole Borer / Auger Bit
£82.50 + VATThe Lumag 5EB300 300mm Post Hole Borer / Auger Bit is designed for use with the Lumag EB520G Post Hole Borer / Auger.
-
Lumag 5EB200 200mm Post Hole Borer / Auger Bit
£65.83 + VATThe Lumag 5EB200 200mm Post Hole Borer / Auger Bit is designed for use with the Lumag EB520G Post Hole Borer / Auger.
-
Lumag 5EB80 80mm Post Hole Borer / Auger Bit
£49.17 + VATThe Lumag 5EB80 80mm Post Hole Borer / Auger Bit is designed for use with the Lumag EB520G Post Hole Borer / Auger.
-
-
Lumag 5SP50 Water Pump
£165.83 + VATThe Lumag 5SP50 Water Pump is a pump and drive lead for use with our Lumag LFR40 Drive Unit.
EAN: 4047424005705
SKU: 5SP50
-
Lumag GF450 Petrol Trencher (450mm Max Depth)
£1,249.17 + VATThe Lumag GF450 Trencher enables you cut trenches 100mm wide and 450mm deep quickly and easily. This machine is great for laying pipes and cables. Its strong steel chassis and large rubber tyres make moving over rough ground easier. The cutting bar is adjusted by moving the notched out handle on the near side of the machine. The teeth are carbide tipped and hard wearing. The spoil is cleared from the chain area by a side mounted auger. The machine is fitted with a “dead-mans safety switch” and is powered by a 196cc Loncin engine. It is possible for the GF450 to be fitted with a Honda engine at an additional cost.
Did you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
-
Lumag VH500GXA 500kg Track Barrow with Petrol Honda Engine & Hydraulic Tip
£3,999.17 + VATThe Lumag VH500 GXA track barrow is the entry level hire quality mini dumper. Fully hydrostatic, robustly made machine. This machine was made with durability and ease of use in mind. It is propelled by a top of the range hydraulic pump. This machine will offer years of great service. Fitted with a Honda GX200 engine.
Did you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
-
-
Lumag G8E 8 kw Petrol Generator
£1,082.50 + VATThe Lumag G8E Petrol Generator features a fully copper wound stator and remote control electric start. Built in a sturdy wheeled steel frame with a powerful 8 kw output. This generator has 400v and 230v outputs.
Did you want to save your customer some work and hassle and make a bit of extra margin? You can upsell a PDI please find this option at the bottom of the page.
EAN: 4047424004890
SKU: G8E
-
Lumag 5PL350 3.5m Tamping Beam
£240.83 + VAT -
Log Saw Lumag Tilting circular saw WS700T-230v 700mm Blade
£969.00 + VATIntroducing the Lumag WS700T230 Log saw 230v
- 230v Power Motor
- 700mm blade
- 24cm cut
- Easy to use
-
-
Lumag DS450T Turbo Diamond Blade
£115.83 + VATThe Lumag DS450T Turbo Diamond blade is designed for use with the Lumag STM450-700 Masonry Saw Bench.
-
Outland Tools DC5 wood chipper
£499.16 + VATThe DC5 Outland Wood chipper is fitted with a powerful and reliable RATO 212cc 4 stoke overhead valve engine. You will find this engine easy to start and very reliable and with 7 HP its more than powerful enough to get the job done. Chipping System The wood chipper is fitted with a duplex drum…
-
-
Sale!
Loncin LC2V90FD-15 999cc Shaft Variable Speed Control 36.5mm shaft v twin
Original price was: £1,799.00.£1,149.00Current price is: £1,149.00. + VATLoncin LC2V90FD-15 999cc Shaft Variable Speed Control V-Twin Engine
The Loncin LC2V90FD-15 is a high-performance, V-twin engine built for reliability and power in demanding applications. With a robust 999cc displacement, this engine offers exceptional performance for professional-grade tasks, making it ideal for heavy-duty machinery, industrial equipment, and high-power outdoor tools.
Key Features
- Powerful V-Twin Configuration: The twin-cylinder design ensures smooth, efficient operation with enhanced power delivery and reduced vibration.
- Durable 36.5mm Shaft: The precision-engineered shaft ensures compatibility with a wide range of equipment, while maintaining superior durability under heavy loads.
- Variable Speed Control: Provides precise control over engine speed, offering adaptability across diverse applications and optimizing fuel efficiency.
- Heavy-Duty Construction: Built with high-quality materials for longevity, ensuring dependable operation in rugged environments.
- Advanced Cooling System: Keeps the engine running efficiently, even during extended use or under high stress.
- Low Noise and Vibration: Engineered for a quieter, smoother experience without compromising power.
Technical Specifications
- Displacement: 999cc
- Engine Type: V-twin, air-cooled
- Output Shaft Diameter: 36.5mm
- Speed Control: Variable
- Fuel Efficiency: Optimized for extended run times
This engine is perfect for operators needing a reliable and powerful engine to tackle demanding tasks. Whether for industrial equipment, commercial lawn care, or custom builds, the Loncin LC2V90FD-15 delivers exceptional performance, efficiency, and durability.
Ready to power your project with unmatched reliability? The Loncin LC2V90FD-15 is the solution you’ve been looking for!
-
Masonary saw bench 1200mm cut 350mm blade Lumag STM3501200 230v 16amp
£1,249.17 + VATThe Lumag STM350-1200PRO Masonry Saw is a premium stone and tile-cutting solution for professionals demanding precision, power, and efficiency. With its exceptional 1200mm maximum cutting length and ability to cut to a depth of 107mm in a single pass—or up to 130mm when performed in two stages—this saw is engineered for tackling large-scale masonry and tiling projects. Powered by a robust motor that requires a standard 16-amp 230V power supply, the STM350-1200PRO delivers reliable performance suitable for the most demanding job sites.
Combining cutting-edge features , this saw offers unmatched accuracy and durability. Its powerful 350mm diamond blade, advanced water-cooling system, and sturdy design make it ideal for cutting a variety of materials, including stone, concrete, tiles and pavers. Whether you’re in construction, landscaping, or tiling, the Lumag STM350-1200PRO ensures professional results with every cut. Designed with user convenience in mind, it features an ergonomic layout, adjustable cutting table, and smooth operation, making it a must-have for professionals and serious DIYers alike.
Please note: You may need a specialist blade for some types of tiles or other materials, to ensure a high quality cut/ finish especialy coated / glazed tiles.
-
Wood Chipper Outland Tools DC15 Petrol 420cc E-Start 15cm Capacity Big Drum!
£1,165.83 + VATWe would like to introduce our Outland tools DC15 Wood Chipper. Our own Brand designed to offer the ultimate price to quality ratio. The best Value chipper on the market.
- Great for sticks with a diameter of up to 15cm maximum and works best with a continuous feed of 10 to 12cm.
- Drum chipper with twin blades and counter knife.
- For leafy branches, Sticks and twigs.
- This is a chipper, not a shredder and is not to suited for use with green waste such as leaves on their own.
- Powerful 15Hp 420cc Electric Start 4 stoke Over Head Valve RATO Engine.
- Easy to move with the balanced chassis and large rubber tyres.
- Long 3-year warranty.